Center for the collective use of scientific equipment

Center for the collective use of scientific equipment in Medical Institute

Biomedical research center

PUBLICATION:

2025:

Elucidation of Potential Genotoxicity of MXenes Using a DNA Comet Assay
Electrospun Chitosan/Polylactic Acid Nanofibers with Silver Nanoparticles: Structure, Antibacterial, and Cytotoxic Properties

2024:

MXene-Based Chemo-Sensors and Other Sensing Devices
Antimicrobial Activity of Two Different Types of Silver Nanoparticles against Wide Range of Pathogenic Bacteria
Influence of silver nanoparticles addition on antibacterial properties of PEO coatings formed on magnesium
MXene-Polydopamine-antiCEACAM1 Antibody Complex as a Strategy for Targeted Ablation of Melanoma
1D ZnO–Au nanocomposites as label-free photoluminescence immunosensors for rapid detection of Listeria monocytogenes

2023:

Polycaprolactone–MXene Nanofibrous Scaffolds for Tissue Engineering
Low-Frequency Ultrasound Reinforces Silver Nanoparticles Effect in Experimental Chronic Non-healing Purulent Wounds Treatment
Craniofacial reconstruction using 3D personalized implants with enhanced surface properties: Technological and clinical aspects
Electrospun UV-cross-linked polyvinylpyrrolidone fibers modified with polycaprolactone/ polyethersulfone microspheres for drug delivery
Development of hydrophilic NbCuSi(N) &TiAlNb(N) coatings as a new strategy for medical implants modification
Characterization, mechanical and biomedical properties of titanium oxynitride coating
Nanodiamond Decorated PEO Oxide Coatings on NiTi Alloy
From Synthesis to Clinical Trial: Novel Bioinductive Calcium Deficient HA/β-TCP Bone Grafting Nanomaterial
Towards Electrochemical Sensor Based on Molecularly Imprinted Polypyrrole for the Detection of Bacteria—Listeria monocytogenes
In Vivo Safety of New Coating for Biodegradable Magnesium Implants
Synthetic Calcium–Phosphate Materials for Bone Grafting
Fabrication and Characterization of Electrospun Chitosan/Polylactic Acid (CH/PLA) Nanofiber Scaffolds for Biomedical Application
Nitrilotriacetic Acid Improves Plasma Electrolytic Oxidation of Titanium for Biomedical Applications

2022:

Tailoring surface properties, biocompatibility and corrosion behavior of stainless steel by laser induced periodic surface treatment towards developing biomimetic stents
Impact of Electrospinning Parameters and Post-Treatment Method on Antibacterial and Antibiofilm Activity of Chitosan Nanofibers
BIOLOGICAL BEHAVIOUR OF CHITOSAN ELECTROSPUN NANOFIBROUS MEMBRANES AFTER DIFFERENT NEUTRALISATION METHODS
Functional and biological characterization of chitosan electrospun nanofibrous membrane nucleated with silver nanoparticles
Comparative Measurements and Analysis of the Electrical Properties of Nanocomposites TixZr1−xC+α-Cy (0.0 ≤ x ≤ 1.0)
MXene-Assisted Ablation of Cells with a Pulsed Near-Infrared Laser
Effect Of CaP-particles on Ceramic-like Coatings Formed on Magnesium via Anodisation
Impact of MMP-9 Genetic Polymorphism and Concentration on the Development of Coronary Artery Disease in Ukrainian Population
Plasma electrolytic oxidation of Zr-Ti-Nb alloy in phosphate-formate-EDTA electrolyte
The Multistep Process of Coating PCL Membranes with MXene Solution
Development of hydrophilic NbCuSi(N) &TiAlNb(N) coatings as a new strategy for medical implants modification

2021:

Biocompatibility and electron microscopy studies of epitaxial nanolaminate (Al0·5Ti0.5)N/ZrN coatings deposited by Arc-PVD technique
Complementary effect of non-persistent silver nano-architectures and chlorhexidine on infected wound healing
F- and P-enriched Coatings for Mg Implants by Low Energy PEO Process
Antimicrobial Electrospun Chitosan Nanofibrous Membranes Functionalized with Silver Nanoparticles
Preparation and characterisation of new biomaterials based on chitosan iodide with biologically active dyes
In vitro evaluation of electrochemically bioactivated Ti6Al4V 3D porous scaffolds
Hemostatic performance and biocompatibility of chitosan-based agents in experimental parenchymal bleeding
Investigation of AC Electrical Properties of MXene-PCL Nanocomposites for Application in Small and Medium Power Generation
Effects of the sources of calcium and phosphorus on the structural and functional properties of ceramic coatings on titanium dental implants produced by plasma electrolytic oxidation
Femtosecond Laser Surface Micro- and Nanotexturing of Metals, Alloys, and Ceramics Perspective for Biomedical Applications
State of immunity in preschoolers with acute respiratory viral infections associated with adenoid vegetations
Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions
Nanomaterials and Nanocomposites, Nanostructure Surfaces, and Their Applications
MXenes—A New Class of Two-Dimensional Materials: Structure, Properties and Potential Applications
Development, characterization and antimicrobial properties of silver nanoparticles loaded chitosan-alginate sponges for biomedical application
Ti6Al4V Scaffolds with Alkali Activated Surfaces for Tissue Engineering
Monitoring MMP-2 and MMP-7 levels in traumatic wounds of the ocular adnexa
Combination of Chlorhexidine and Silver Nanoparticles: an Efficient Wound Infection and Healing Control System
Hemostatic and Tissue Regeneration Performance of Novel Electrospun Chitosan-Based Materials
Cell viability and collagen deposition on hydroxyapatite coatings formed on pretreated substrates

2020:

Effects of the sources of calcium and phosphorus on the structural and functional properties of ceramic coatings on titanium dental implants produced by plasma electrolytic oxidation
Low-frequency ultrasound increase effectiveness of silver nanoparticles in a purulent wound model
Single-walled carbon nanotubes loaded hydroxyapatite-alginate beads with enhanced mechanical properties and sustained drug release ability
Fast LIPSS based texturing process of dental implants with complex geometries
Antibiotic resistance of the nasopharynx microbiota in patients with inflammatory processes
Morphological Changes in Gram-Negative Microorganisms Treated with Silver and Copper Nanoparticles
Synthesis, Characterization and Antibacterial Activity of Hydroxyapatite Composite Materials Loaded with ZnO Nanoparticles
Plasma Electrolytic Oxidation of TiZr Alloy in ZnONPs-Contained Solution: Structural and Biological Assessment
Plasma Electrolytic Oxidation of the Titanium-Zirconium Alloy (Zr60Nb21Ti19) for Dental Implant
Nanostructured Hemostatic Sponges Made from Chitosan: Structural and Biological Evaluation
Formation of a Bacteriostatic Surface on ZrNb Alloy via Anodization in a Solution Containing Cu Nanoparticles
New Zr-Ti-Nb Alloy for Medical Application: Development, Chemical and Mechanical Properties, and Biocompatibility
In Vitro Biological Characterization of Silver-Doped Anodic Oxide Coating on Titanium
Biocompatibility and Antibacterial Properties of ZnO-Incorporated Anodic Oxide Coatings on TiZrNb Alloy

2019:

Cell and tissue response to nanotextured Ti6Al4V and Zr implants using high-speed femtosecond laser-induced periodic surface structures
Chitosan-based bioactive hemostatic agents with antibacterial properties—synthesis and characterization
Chemical and structural characterization of sandlasted surface of dental implant using ZrO2 particle with different shape
Chitosan-based composite materials comprising metal or metal oxide nanoparticles: Synthesis, characterization and antimicrobial
Development of chitosan hemostatic sponges with different solvents and tranexamic acid
Corrosion and biocompatibility improvement of HA-coated magnesium-based alloys as bone implant materials
Effect of ultrasound treatment on chitosan-silver nanoparticles antimicrobial activity
Ag nanoparticle-decorated oxide coatings formed via plasma electrolytic oxidation on ZrNb alloy

2018:

Degradation and in vivo response of hydroxyapatite-coated Mg alloy
PLA nanofibrous scaffolds for full thickness wound healing
In vitro degradation and in vivo toxicity of NanoMatrix3D® polycaprolactone and poly(lactic acid) nanofibrous scaffolds
Antibacterial Activity of In Situ Prepared Chitosan/Silver Nanoparticles Solution Against Methicillin-Resistant Strains of Staphylococcus aureus

2017:

In-vitro and in-vivo degradation studies of freeze gelated porous chitosan composite scaffolds for tissue engineering applications
Experimental evaluation of new chitin–chitosan graft for duraplasty
Magnesium-based biodegradable alloys: Degradation, application, and alloying elements
NanoMatrix3D® nanofibrous scaffolds for tissue engineering approaches
Antibacterial activity of the new copper nanoparticles and Cu NPs/chitosan solution
NanoMatrix3D® technology in development of nanofibrouse scaffolds: Biomedical evaluation
Mg alloys in vitro degradation in simulated body fluid and citrate solutions

2016:

Dielectric and electric properties of new chitosan-hydroxyapatite materials for biomedical application: Dielectric spectroscopy and corona treatment
Synthesis and characterization of hydroxyapatite-gelatine composite materials for orthopaedic application
Cell and tissue response to modified by laser-induced periodic surface structures biocompatible materials for dental implants
Scroll to top

Contact Us